Make sure wireless network is secure

Setting up the security on your wireless network really is quite simple and something that is really essential. You do not want anyone to be able to access your wireless network, allowing you to ensure that you configure encryption, so you must limit the possibilities of someone unauthorized access to your local network and Internet. There are a large number of routers available in the market was basically the settings should be very similar to the line. Many people shy away from these notes it is too technical for them to easily make small changes and may want to call in a so-called experts, to enable security features and ensure that they are set up correctly. To be honest, you should learn how to do it himself because it is very easy to reach. First, you need a direct connection to your wireless router with a cable from your laptop. This is a network cable or Cat 5 cable, as it is sometimes called. Most routers you can access via its interface with your Internet browser simply by the IP address of the router in the address bar. If you are unsure how this have to do only a quick look at your router manual and they should do a clear and precise instructions, like this. After you see the interface on your laptop screen and you will activate then so in view of the security settings to make the security changes and, if found necessary. Out of this fear is very very easy and you can not make mistakes. There are a few things that you can change is the network ID, or SSID, which is essentially the name of your network. Change these to a name, you will realize, and we will in a moment to explain about. To enable WEP encryption, with this you have to enter a 10 character pass phrase or password. You will be prompted to enter numbers between 0-9 and letters AF to make sure you take notes of what the password is entered, as you know, what is the password required at a later date. Once that is done you can save settings and may also need the router to reboot. Disconnect the network cable from your laptop. You must then click the View available wireless networks are within Windows, which should all of the WiFi networks in your area list. Your network will probably be the strongest signal, but you can also say that it from the network ID, which is in one of the previous steps setup. Double-click on your network and enter the password once it has already done so, you should have a successful connection to your wireless network. Your network is now secure and encrypted, and you should now be reassured that there is no unauthorized access to your local network or someone to be with your Internet connection.