Proper configuration of e-mail servers – Separate data from your browser Traffic
delivered one of the most important for your e-mail on one of the many lists as Spam Barracuda, SpamCop, Spamhaus, or event called blacklist will be performed. Once registered for these services, used for messages sent any organization that they are actively blocked.
Sorry, always on a black list is easy, do it often.
A common mistake made by many organizations, leading a black list, the same public IP address for the mail connector as the rest is to use the organization of maritime transport. Although this configuration simplifies the configuration of the firewall, it makes the organization a potential blacklist. This is because each compromised machine on the network from spam and other malware, whether it is part of the organization or not, can lead to a black list. As all sides show off a black list of IP address to a block instead of the apparent host DNS or domain name. Since IP is the key that translates a machine or NAT at the same address that your mail server can ultimately lead to your mail server on the blacklist, so that at least sharing devices with a single address your mail server the better.
While implement what you need to work with your ISP to get a slightly larger IP range of your service, but if you only take the time to configure the firewall fire to the end user to separate the flow of email traffic, save you a lot of problems on the road. If you are on a tight budget and the need to provide services to the same address CoHost how you really afford not to separate IP addresses for the main service, at least very much on the server and workstation traffic with different IP addresses. It is much less likely but not guaranteed that your Web server or FTP, is a spam host, use the entire collection of workstations and laptops of the same firewall.
For more information about black lists, e-mail, see the Wikipedia article on DNS blacklist.
To determine whether your mail server on a common blacklist, simply navigate to mxtoolbox.com and use their blacklist tool. Just enter the public IP address of your mail server, click the Check button on the black list, and in a few moments you will see if this address on one of over 100 public blacklists. If you find that your mail server address is blacklisted, do not panic. It is easy to browse the main site from the blacklist filter on your server to read and remove a guide, how to ask. Often they will ask for more details about why you were in first place on the blacklist, as an open relay, unsolicited bulk e-mail address, etc. Just to get this problem, resignation, and, unfortunately, wait. Often it takes to be assessed approximately 1 business day.
Mail server