Recently a friend of mine, a game fans had repaired his laptop keyboard MX6454 thrice. Although I proposed to replace a keyboard, the keyboard is still under the same problem. There’s always one or two keys to control. So, it’s annoying to have a broken key, especially if the key used in a lot. Replacing a key on the keyboard can be a bit complicated, because the key material can vary, even on the exact model of the computer.

Here are the steps or as a reference:

Firstly, the broken key. You can press the button, so the key to spring back, which means that the cut is in order. Otherwise, it means that the cup is broken. Then use a screwdriver to break the key off and the plastic mechanism under the key. Make sure that the main entrances filled out for your laptop keyboard. put some glue on the end of the rubber cup replacement. Then the cup in the middle of the empty space on the exact spot where the old location. Then insert the small tabs on the sides of the plastic mechanism under the hook on the keyboard. These tabs are due in different positions depending on when and where you built your laptop Pavilion is located, but until the mechanism is properly aligned, there is only one way to adjust for the tabs. Press the other side of the mechanism as soon as the tabs are in place to lock up the whole room. Finally, press down until it clicks into place. Repeat for the key cap that you removed earlier. However, this Gateway MX6454 laptop keyboard works again.

It is not difficult to replace the key. If you were in this situation, you can find out how this Gateway MX6454 laptop keyboard. You can save money sound. In addition, enjoy the process.


Laptop Keyboard Repair