As you can connect your PC with straight or crossover cable, what is the difference between these two possibilities to go directly through cable or crossover cable? Why are there two types of cables? What are they? Law by cable, wire straight through cable, son transfer to end the recording. You use a crossover cable if you connect two computers directly (NIC NIC). To connect a router to the computer and computer-crossover and usually need the correct cables needed rest.

Are you using a straight cable , if there is a hub, switch or router between two or more PCs (NIC-Hub/Switch/Router-NIC). This is no difference in speed, it is only a method of communication. It depends on the hardware that’s just a free LPT or COM port on any computer plugged into these ports and a cable between the computer.

The simple answer is a cross on the image above, it shows what I mean. In a straight cable at both ends at the end of A arranged as a crossover cable, one end is like

arranged end B. It can also help if you so you Reply with quote two computers with crossover cable, you must be the IP addresses in the specified order. For example:

Are you using a straight cable if there is a hub, switch or router between two or more PCs (NIC-Hub/Switch/Router-NIC). This is no difference in speed, it is only a method of communication. It depends on the hardware plugged in, you need either a COM or LPT port free port on any computer and a cable between the computer, these ports. connect

Reply with quote two computers with crossover cable, you must be the IP addresses in the specified order. For example:

Cable Router