Computer hardware and software
How to refill / reset brother TN-210 toner cartridge – Brother HL-3070CW
brother toner
Quick video on how to reset the Brother TN-210 Black, Yellow, Magenta, Cyan cartridge. Your printer will say you are out of toner and lock up far before you are truly out of toner. Once the flag gear is reset you should be able to practically double the output of the cartridge before you need to refill or replace it. Please note that the flag gear is NOT present on the teaser cartridges that come with the printer. A flag gear can be purchased online if desired. Sports memorabilia consignment auction: http:www.pristineauction.com
-
-
#8 written by flybman2007 1 year ago
-
#9 written by terracore 1 year ago
What a waste of time. All you need to do is:
1) Turn the printer off and then on again.
2) Open cover.
3) Press Cancel and Secure Print buttons at the same time.
4) Press the + button and scroll through the colors that need to be reset. (reset both STR and STD when prompted. I just reset them all.
5) Press OK (twice, once for STR and STD)
6) You’re done. You don’t even need to take the cartridges out and the printer thinks you just installed four new toner cartridges. -
#10 written by terracore 1 year ago
What a waste of time. All you need to do is:
1) Turn the printer off and then on again.
2) Open cover.
3) Press Cancel and Secure Print buttons at the same time.
4) Press the + button and scroll through the colors that need to be reset. (reset both STR and STD when prompted. I just reset them all.
5) Press OK (twice, once for STR and STD)
6) You’re done. You don’t even need to take the cartridges out and the printer thinks you just installed four new toner cartridges.
- Comment Feed for this Post
Man if this works your a life saver!!! Thats good that i kept all the other ones that i bought.. if this work im going to work on those to…. thanks for the tip!!!